Industrial Coating

Product Price :Get Latest Price

WITCOAT TWO PACK EPOXY PAINT:

DESCRIPTION:

Witcoat Two Pack Epoxy Paint is a two component modified polyamide cured epoxy paint with high resistance to impact and abrasion. It is also resistant to Spillage of Petrol, Mineral oil, Vegetable and Animal oils.
RECOMMENDED:
As a finishing coat for protection of steel surfaces directly. Strongly suggested as a finish coat for Chemical plants & also in Fertilizers, Petrochemical Complexes, Thermal Power Plants, Mines, Bridges, Dock installation, etc. It has excellent corrosion protection in fresh and sea water.

PHYSICAL PROPERTIES:

APPLICATION DETAILS:
MIXING RATIO : BASE: 4 parts by volume
CURING AGENT : 1 part by volume

POT LIFE : 4-6 hours at 30°C
APPLICATION METHOD : Airless spray ,Spray Brush
THINNER : Witcoat Epoxy Thinner
INDICATED FLIM : Dry: 35-45 micron (By Dft- Meter)

DISCLAIMER : The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for loss or damage howsoever caused including liability for negligence, which may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use No guarantee of results is implied since condition of use is beyond our control.

Approx. Rs 200 / LitreGet Latest Price

WITCOAT Q.D. ANTICORROSIVE PAINT:

DESCRIPTION:

Witcoat Q.D.Anticorrosive Paint is a modified alkyd based coatings resistant to Salt water, acids, alkalis and wide range of chemicals. This is free from Lead, Chromate, and Chlorine & Heavy metals. RECOMMENDED:

As a finishing coat for exterior and interior surface, modified alkyd & Pigment based systems is used for corrosive marine and industrial environment. Suitable for protection of Pipes & structural steel in chemical and fertilizer plants, dock installation, thermal power plants etc.

PHYSICAL PROPERTIES:

APPLICATION DETAILS:

APPLICATION METHOD : Air Spray Brush

RECOMMENDED THINNER : Witcoat Q.D. Thinner

FILM THICKNESS : Dry: 35-45 microns (By Dft-Meter)

SURFACE PREPARATION:

Remove oil grease with suitable detergent solution and other contaminants by high pressure fresh water hosing. Dust off the residue.

APPLICATION CONDITIONS :

Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.

SAFETY:
As a general rule, inhalation of solvent vapour or paint mist and contact of liquid paint with skin and eyes should be avoided. Forced ventilation should be provided when working with solvent borne coating in confined spaces or stagnant air. Even when ventilation is provided respiratory skin & eyes protection are always recommended when spraying. In addition, national local safety regulations should be followed.

Product Price :Get Latest Price

Witcoat Synthetic Enamel Paint:

DESCRIPTION:

Witcoat Synthetic Enamel Paint is a modified alkyd based coatings resistant to Salt water, acids, alkalis and wide range of chemicals. This is free from Lead, Chromate, and Chlorine & Heavy metals.
RECOMMENDED:
As a finishing coat for exterior and interior surface, modified alkyd & Pigment based systems is used for corrosive marine and industrial environment. Suitable for protection of Pipes & structural steel in chemical and fertilizer plants, dock installation, thermal power plants etc.

PHYSICAL PROPERTIES:

APPLICATION DETAILS:
 

DISCLAIMER:

The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for loss or damage howsoever caused including liability for negligence,Which may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of results is implied since condition of use is beyond our control.

Product Price :Get Latest Price

WITCOAT RED OXIDE PRIMER:

DESCRIPTION:

Witcoat Red Oxide Primer is an anticorrosive primer based on Synthetic aromatic solvent and additive mixture. It has excellent durability and matt finish. It has antirust protective properties.

RECOMMENDED:

As a surface tolerant primer for the protection of interior and exterior steel in severely corrosive atmosphere. It is widely used for the protection coat for of windows frames, fences, structural steel, pipes, field machinery and storage tanks, etc from Chemical fumes, excessive heat and humidity ,rain and wind.

PHYSICAL PROPERTIES:

APPLICATION DETAILS:

APPLICATION METHOD : Airless Spray Air Spray Brush

THINNER : Witcoat G.P. Thinner

FILM THICKNESS : Dry: 35-45 microns (By Dft-Meter)

DISCLAIMER:
The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for loss or damage howsoever caused including liability for negligence, which may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of results is implied since condition of use is beyond our control.